USB PROGRAMMABLE UNIVERSAL INPUT DIN RAIL VOLTAGE TRANSMITTER
SEM1620
 |
Simple USB Configuration Port |
 |
|
|
Universal Pt100,Thermocouple,mV,mA Input |
|
Push Button User Trim |
|
Three Wire voltage Output |
|
10 Year Warranty |
| |
|
| |
|
| |
|
| |
|
 
The SEM1620 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-
INPUT TYPE |
LOW RANGE |
HIGH RANGE |
UNITS |
OUTPUT |
BURNOUT |
USER TRIM |
PT100
T/C K, J, E, N, T, R, S
mV
mA |
Input @ 4mA |
Input @ 20mA |
°F, °C
mV, mA |
(0 to 10)V
(2 to 10)V
(0 to 5)V
(1 to 5)V
(0 to 1)V |
Up/Scale
Down/Scale |
On , Off |
The software allows the user to set factory default settings. The SEM1620 is also provided with user push button trim, allowing trim adjustments at both offset and span. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.
As the SEM1620 case design is based on the DIN43880 standard, a wide range of are available to the user, offering both visible and user access to the front panel functions. |
