The SEM1000 ground loop isolator is designed to be series connected into a new or existing (4 to 20) mA current loop
and provide an isolated (4 to 20) mA signal capable of driving into 300 Ω maximum load. The output is
powered from the input loop.
This ground loop isolator requires no user adjustment during commissioning. Minor adjustments can be made to the
calibration of the device by means of the two front panel accessible calibration potentiometers.
Incorrect connection in the loop will not damage the device as long as the specified maximum
currents/voltages are not exceeded.
Last ned våre gratisapper på både Apple- og Android-enheter.
FINN UT MER
Fortell oss hva du ønsker å oppnå, så skal vi forsøke å tilby den beste løsningen og prisen. Vil du heller snakke med noen?
Ring 01684 296818.
Vi vil gjøre vårt beste for å svare innen 4 arbeidstimer.
Hvis du trenger et raskere svar, kan du ringe oss på
01684 296818.