SEM206P

Programmable, suitable for Pt100 temperature probes

The SEM206P is a cost effective “smart” in head transmitter that accepts PT100 temperature sensors. It
converts sensor output over a configured range, to a standard industrial (4 to 20) mA transmission signal.
PC configuration allows the user to select range, units and burnout direction, without requiring calibration
equipment. Configuration is performed quickly using our USB port driven configurator by simply connecting two clips
to the SEM206P loop terminals and following the software instructions. Calibration set up may be saved as a file on
the PC for later use. If required, the desired range can be specified at the time of order, removing the need for user configuration.

The pt100 temperature transmitter can be ordered with any of our temperature probes and connection heads. We can supply temperaturføler enheter med temperaturtransmitteren inkludert.

Hvis du allerede kjenner spesifikasjonene du trenger, kan vi konfigurere produktet for deg uten ekstra kostnad. Hvis ikke området er spesifisert, vil transmitteren bli sendt med standardområdet Pt100 0/100 grader C.

FUNKSJONSHøydepunkter

SENSORREFERANSE
The SEM206P sensor referencing via the Windows based USBSpeedlink software allows for close matching
til en kjent referansesensor, noe som eliminerer mulige sensorfeil.

DETEKSJON AV SENSORUTBRENNING
If a sensor wire is broken or becomes disconnected the SEM206P output will automatically go to its user
definert nivå oppskaling eller nedskaling, og LED-lampen lyser.

STABILITET

The SEM206P in head transmitter incorporates the latest digital technology to ensure accurate, low drift
ytelse.

LED-ADVARSEL

If the SEM206P detects the sensor is out of range, then a red LED will illuminate in the transmitter to alert the user that something is wrong.