SEM310 og SEM310X

Universal, Dual Input, High Performance HART Temperature Transmitter

The SEM310 HART (generic device) temperature transmitter is a universal device which accepts most commonly used Pt100, thermocouple, mV , potentiometer sensors. There is a version, (SEM310X) approved for use in hazardous areas and approved to ATEX, IECEx and UKEX.  It generates an industry standard (4 to 20) mA transmission signal over a programmed process range or can be used in HART multi drop mode. Compatible to HART 5, 6, or 7 the product can be easily programmed using our free USB Speedlink software and a standard USB lead (safe area version). It can also be programmed via a HART communication device / system.

Isolering er en standardfunktion for at overvinde potentielle jordsløjfeeffekter, og en sensorreferencefunktion gør det muligt at kalibrere transmitteren til en bestemt sensor.

This HART temperature transmitter has two sensor inputs. This allows the connection of two sensors enabling maths functions, such as difference, average, highest, lowest, sensor redundancy (TC and mV only) are available. The math function of both inputs is then reflected in the single 4 to 20mA output.

Produktet leveres også med en kalibreringsfunktion, så både offset og span kan justeres, så de matcher en bestemt temperatursensor, når den anvendes på en kendt referencetemperatur.

The HART temperature transmitter can be ordered with any of our temperature probes and connection heads. We can supply safe area probe assemblies or ExD and Exia approved temperatursonde samlinger med den inkluderede temperaturtransmitter.

Hvis du allerede kender de specifikationer, du har brug for, kan vi konfigurere produktet for dig uden ekstra omkostninger.