SEM206TH

Temperature transmitter suitable for Thermistor or Pt1000 sensors

Datalehti >Käyttöohje >EY-vakuutukset >Tuoteopas >Yhdistyneen kuningaskunnan julistukset >

Hyväksyy termistori- tai Pt1000-anturit.
Muita kirjastossamme saatavilla olevia antureita täältä.
4–20 mA:n silmukkavirtalähtö.
Anturin siirtymätoiminto.
Saatavilla mittatilaustyönä tehtyjä termistoreita.

The SEM206TH thermistor temperature transmitter accepts thermistor or Pt1000 temperature sensors and converts the sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal. The output signal is linear
to temperature. A variety of thermistor types are available when using USB SpeedLink configuration software. Please
consult your supplier for custom thermistors. In addition to the PC configuration feature, simple push button operation allows the user to select the desired temperature range manually, by either simulating the thermistor temperature with a resistance box or setting the thermistor sensor to the required calibration point and pressing button to store at both 4 mA and 20 mA points.

The thermistor temperature transmitter can be ordered with any of our temperature probes and connection heads. We can supply lämpötila-anturi assemblies with your required thermistor and the thermistor temperature transmitter included.

Jos tiedät jo tarvitsemasi spesifikaatiot, voimme konfiguroida tuotteen puolestasi ilman lisäkustannuksia.

OMINAISUUDEN KOROSTAVAT

ANTURIN KORJAUS
The SEM206TH sensor correction function via the Windows based USBSpeedlink software allows for close
sovittaminen tunnettuun referenssianturiin, mikä eliminoi mahdolliset anturivirheet.

ANTURIN PALUN TUNNISTUS
If a sensor wire is broken or becomes disconnected the SEM206TH output will automatically go to its user
defined level upscale or downscale and the LED illuminates.

VAKAUS
The SEM206TH in head transmitter incorporates the latest digital technology to ensure accurate, low drift
suorituskykyä.

PC / PUSH BUTTON CONFIGURATION
PC configuration requires USB SpeedLink software together with a USB configuration kit. The software
allows the operator to select from a variety of thermistor types, then set the required temperature range
for a (4 to 20) mA output. A single push button and LED indicator allows the user to configure transmitter range against a manually set input condition.