Produkter

  1. Hem
  2. Produkter
  3. Signalomvandlare
temperature signal conditioner
SEM1600T
Temperature or potentiometer input signal ...
Läs mer
  • Suitable for RTD, thermocouple or potentiometer sensors
  • Current (active or passive), voltage, bipolar voltage output
  • Powered ( 10 to 32) V AC / (10 to 48) V DC supply
  • Sensor offset and output Alignment
  • View live data on an Android phone or tablet
Läs mer
process signal conditioner
SEM1600VI
mA or voltage input with ...
Läs mer
  • (- 50V to 50) V dc or (- 50 to 50) mA input
  • Accepts both active and passive mA signals
  • Current, voltage or bipolar voltage output
  • Input and output signals fully programmable within their range
  • Powered ( 10 to 32) V AC / (10 to 48) V DC Supply
  • 22 Segment User Linearisation
  • View live data on an Android phone or tablet
Läs mer
signal conditioner voltage output
SEM1620
Universal input and 3 wire voltage ...
Läs mer
     
  • Pt100, Thermocouple ,mV ,mA Input
  • (0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Programmable output
  • Push button user trim for in process fine tuning
  • Galvanisk isolering
  • Hög stabilitet
  • View live data on an Android phone or tablet
Läs mer
signal conditioner with alarms
SEM1630
Universal input with 2 relay outputs
Läs mer
     
  • Pt100, Thermocouple, mA, mV input
  • Dual Relay Outputs 250V AC @ 1A
  • Relay Contacts isolated from each other
  • Galvanisk isolering
  • View live data on an Android phone or tablet
  • Hög stabilitet
  • PC-programmerbar
Läs mer
loop powered alarm device
SEM1636
Loop powered with 2 relay outputs
Läs mer
  • Dual Change Over Relay Output
  • Relay Rating 250V AC 1A; 30V DC 1A
  • Latching Relays In Case Of Loop Failure
  • Slingdriven
  • LED Alarm Indication
  • Hög stabilitet
  • View live data on an Android phone or tablet
     
Läs mer
lastcellsförstärkare
SEM1600B
For load cell sensors. Provides ...
Läs mer
  • Accepts up to 4 load cells in parallel
  • Output current or voltage signal
  • Kalibreringsfunktion
  • Remote tare function
  • Power supply (10 to 32) V AC or (10 to 48) V DC
  • Hög stabilitet
  • View live data on an Android phone or tablet
       
Läs mer
flow meter conditioner
SEM1600F
Flow meter conditioner
Läs mer
  • Accepts process pulse signals between (0.1 to 65 KHz)
  • In counter mode accepts (DC to 1000) Hz
  • mV, mA, PNP, NPN, TTL compatible
  • Namur sensor compatible
  • Rate, totalise, k factor, m factor, maths
  • mA, voltage, bipolar voltage and relay outputs
Läs mer
universal signal conditioner
SEM1700
Universal input with dual relay ...
Läs mer
  • RTD, Thermocouple, mV, V, mA and potentiometer inputs
  • Isolated universal voltage or current output
  • Dual change over relay outputs
  • Universal power supply 22 to 250V AC or DC
  • Powers both input and output current loops
  • SIL Hardware Safety Integrity
  • View live data on an Android phone or tablet
Läs mer
temperature measurement signal conditioner
SEM1720
2 Channel for Pt100, T/C. ...
Läs mer
  • Dual channel with 5 port isolation (3.75Kv)
  • Accepts RTD, thermocouple or potentiometer sensors
  • Voltage or current output signals
  • Maths functions between channels
  • Sensor redundancy switching
  • Eight user configured preset configurations
Läs mer
signal conditioner dual channel ma or voltage
SEM1750
2 Channel mA / voltage on input ...
Läs mer
  • Dual channel voltage or current (Active/Passive) inputs and outputs
  • 5 Port isolation to 3.75Kv
  • Can be configured as an active signal splitter
  • Maths function on each output
  • Signal linearisation
  • Signal Simulate Function For Diagnostics
Läs mer
Översätt "

Hur kan vi hjälpa till?

Berätta vad du vill uppnå så strävar vi efter att erbjuda den bästa lösningen och priset. Vill du hellre prata med någon?

Ring 01684 296818.

    HUR HÖRDE DU TALAS OM OSS?

    Vi gör vårt bästa för att svara inom 4 arbetstimmar.

    Om du behöver ett snabbare svar, vänligen ring oss på
    01684 296818.