- Pt100,Thermocouple,mV,mA Input
-
(0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Output choices
-
Push Button User Trim For In Process Fine Tuning
-
Galvanic Isolation
The SEM1620 signal conditioner provides a 3 wire isolated voltage output signal and accepts RTD, Thermocouple, mV and passive current sensor inputs.
It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.
Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.
If you require the USB lead to configure this product, it can be seen in our configuration category.