SEM206PV

Pt100 temperature transmitter with voltage output

The SEM206PV is a cost-effective digital in-head transmitter that accepts Pt100 temperature sensors and converts
sensor output over a configured range to a standard industrial (0 to 10) V control signal. The output is linear to
temperature.
PC configuration allows the user to select Range and Burnout direction, without requiring calibration equipment.
Configuration is performed quickly using our USB port-driven configurator by simply connecting two clips to the
SEM206PV power terminals and following the software instructions. Calibration set up may be saved as a file on the
PC for later use.
If required, the desired range can be specified at the time of order, removing the need for user configuration. If the range
is not specified, then the transmitter will be shipped with the default range of (0 to 100) °C and upscale burnout.

SENSOR CORRECTION
The SEM206PV sensor referencing via, the Windows based USB-Speedlink software, allows for close
matching to a known reference sensor, reducing possible sensor errors.

SENSOR BURN-OUT DETECTION
If a sensor wire is broken or becomes disconnected, the SEM206PV output will automatically go to its user-defined level upscale or downscale.

STABILITY
The SEM206PV in-head transmitter incorporates digital technology to ensure accurate, low-drift
performance.